Transmit and receive an infrared (IR) signal over your HDMI cable – For use with select Accell HDMI signal distribution products
Easily control your source device from your HDMI display by sending an IR signal over your HDMI cable to your Accell HDMI signal distribution system. Control a video source from a remote location by sending its remote control IR signal over your HDTV's existing HDMI cable.
Infrared over HDMI Cable Dual-Band Adapter
The Accell Infrared over HDMI Adapter is offered for use with specific Accell signal distribution systems or as a replacement to a damaged or lost IR adapter in your IR over HDMI Adapter Kit. Uses your existing HDMI cable, an optional IR transmitter or IR receiver and your Accell signal distribution system to carry the IR signal over the length of the HDMI cable providing control of your audio/video source using the device's remote.
Plug the adapter into the display end of your existing HDMI cable. Plug an optional IR receiver cable into the 3.5mm jack found on the IR adapter. From your Accell distribution system, run the IR transmitter from the IR port and point it at the IR eye of your source device.
This IR adapter kit is dual-band compatible supporting IR signals from both IR bands (33KHz-60KHz). The IR adapter uses the often unused CEC channel of your HDMI cable to transmit the IR signal through the length of the cable. To activate the IR adapter, disabling the CEC functionality, toggle the switch on the IR adapter to "IR" mode.
IR Control Over Your HDMI Cable
Use the adapter with your Accell HDMI distribution system to control a video source from a remote location by sending its remote control IR signal over your HDTV's existing HDMI cable. This adapter works with an Accell distribution system or as a replacement adapter in an IR Adapter Kit.
- 33kHz to 60kHz dual band emitter - works with all remote controls
- works with nearly all remotes
- Flawless A/V transfer - no distortion or attenuation
- Supports HDMI (High-Speed) pass-through of all supported HD resolutions
- Fully HDMI and HDCP 1.2 compliant
- 3.5mm port for IR TX or IR RX
Included with IR Adapter
- IR adapter with bidirectional IR port
- Double sided tape
For product manual click here
Warranty: 2-Year Replacement