|
The Accell UltraRun High-Definition
Multimedia Interface (HDMI) Signal Repeater supports
up to a total of 164 feet (50 meters) of HDMI cable
for extremely long cable runs. It equalizes and amplifies
the digital signal, correcting the degradation that
can occur over a long cable run, before outputting the
signal to your display. Simply run up to 147 feet (45m)
of HDMI cable from your DVD player or other video source
to the UltraRun signal repeater. Then run up to 17 feet
(5m) of HDMI cable from the repeater to your display.
The UltraRun signal repeater supports up to 8 channel
digital audio and up to 1080p high-resolution digital
video. Its low-power design enables it to be powered
directly from most HDMI sources, typically needing no
external power.
Backwards Compatible With DVI Components
The Accell UltraRun signal
repeater is backwards compatible with DVI equipped components.
Simply use an HDMI to DVI adapter to adapt an HDMI cable
to DVI. Or adapt your DVI cable to the HDMI signal repeater
using a DVI to HDMI adapter. The UltraRun repeater is
HDCP compliant ensuring full compatibility with your
HDMI or DVI devices.
Features
- Supports exceptionally long cable
runs of up to 164 total feet (50 meters)
- Works with resolutions of up to
1080p (1920x1200 computer resolution)
- Backwards compatible with DVI
enabled devices
- Small and compact design for a
clean system setup
- Fully compatible with HDCP compliant components
- Low power, powered directly from most HDMI sources
- 24K gold-plated connectors for optimum signal transfer
|
