UltraRun® High-Definition Multimedia Interface Signal Repeater

This product is discontinued.

P/N: K071C-001J (Sold out)

The Accell UltraRun High-Definition Multimedia Interface (HDMI) Signal Repeater supports up to a total of 164 feet (50 meters) of HDMI cable for extremely long cable runs. It equalizes and amplifies the digital signal, correcting the degradation that can occur over a long cable run, before outputting the signal to your display. Simply run up to 147 feet (45m) of HDMI cable from your DVD player or other video source to the UltraRun signal repeater. Then run up to 17 feet (5m) of HDMI cable from the repeater to your display. The UltraRun signal repeater supports up to 8 channel digital audio and up to 1080p high-resolution digital video. Its low-power design enables it to be powered directly from most HDMI sources, typically needing no external power.

Backwards Compatible With DVI Components

The Accell UltraRun signal repeater is backwards compatible with DVI equipped components. Simply use an HDMI to DVI adapter to adapt an HDMI cable to DVI. Or adapt your DVI cable to the HDMI signal repeater using a DVI to HDMI adapter. The UltraRun repeater is HDCP compliant ensuring full compatibility with your HDMI or DVI devices.


  • Supports exceptionally long cable runs of up to 164 total feet (50 meters)
  • Works with resolutions of up to 1080p (1920x1200 computer resolution)
  • Backwards compatible with DVI enabled devices
  • Small and compact design for a clean system setup
  • Fully compatible with HDCP compliant components
  • Low power, powered directly from most HDMI sources
  • 24K gold-plated connectors for optimum signal transfer

UltraRun™ Cables Feature Superior Construction

The Accell UltraRun Signal Repeater features exclusive technology to equalize and boost the digital signal for superior audio and video clarity over long cable runs. Its integrated, compact design and high-quality construction ensures superb performance and reliability.


TMDS Rate Up to 1.65 Gbit/sec
Input Video Signal 1.4 Volts p-p
Input DDC Signal 5 Volts p-p (TTL)
Power Input (typically not needed) +5VDC, 500mA (adapter included)
Input/Output Type HDMI Ver. 1.2, 19-Pin Female, Single Link
Maximum Supported Resolution 1080p/60Hz (1920x1200 UXGA Computer Resolution)
Maximum Supported Cable Length 50m=45m Source Side, 5m Sink Side
Dimensions 2.1"x1"x0.6" (LxWxH)
Weight 1 oz. (approximate)



Sold Out