UltraAV® DisplayPort to DVI-D Dual-Link Adapter
The UltraAV DisplayPort to DVI-D Dual-Link adapter enables the connection of your DisplayPort supported computer to a DVI Dual-Link supported television, monitor or projector. Simply connect the DisplayPort (male) end of the connector to your computer and plug your existing DVI Dual Link cable from the display into the DVI (female) adapter. Now plug in the USB connector to your computer’s USB port. Setup is complete, there is no software to install. The circuitry built into the adapter seamlessly uses the power from the computer’s USB port for all of its power needs.
DisplayPort to DVI-D Dual-Link Adapter
The DisplayPort to DVI Dual-Link adapter is fully compliant to both DPCP (DisplayPort Content Protection) and HDCP (High-Definition Content Protection) ensuring full compatiblity and successful transmission of video content. The adapter supports DVI-D Dual-Link resolutions of up to 2560x1600 (WQXGA) and all HDTV resolutions including 1080p. The UltraAV DP to DVI Dual-Link adapter supports up to 36-bit color depths delivering the flexibility to meet most display application needs.
AMD Eyefinity Multi-Display Validated
This validation is awarded only to those products that have undergone extensive synthetic and real-world testing. This process helps ensure an optimal experience when using AMD Eyefinity Technology.
DisplayPort to DVI Dual-Link Adapter
· Transfers Uncompressed High-Definition Digital Video Signals
· Supports DVI Dual-Link Resolutions up to 2560x1600 (WQXGA) and 1080p HDTV’s
· Supports up to 36-Bit Color for Billions of Colors
· Supports all DVI-D Dual-Link and DVI-D Single-Link Monitors**
· Engineered for a Fast and Easy Set-up, No Software to Install
*Please note, features are subject to the capabilities of the computer and graphics solution.
**This adapter does not support a 120Hz 3-D stereo display.
UltraAV Adapters Feature Premium Construction
· Compliant with DisplayPort 1.1 specification for 1.62 and 2.7Gbps
· Compliant with Digital Visual Interface (DVI) version 1.0 specification
· Supports Single-Link DVI-D and Dual-Link DVI-D with a built in active protocol converter
Warranty: 2-Year Replacement
Q. My Accell DisplayPort adapter was working great until recently when I began experiencing a flashing or blank screen. What should I do?
A. Please try to recall if you have made any recent video card driver updates. Usually when adapter fails to respond, it's often caused by an unsuccessful driver installation or incompatible driver version. We recommend users to restore their video card driver back to the factory default setting. If a new video card driver is desired, please re-install the new driver again by completely uninstall the older version. Rewriting the driver without uninstalling the previous version may cause problems when using our adapter. Please note that the performance of the DisplayPort adapter is subject to capabilities of the computer and graphics solution.
Please note: Forcing VSYNC on your display in the driver settings may help eliminate this issue.
For adapter PN B087B-002B, please check your DisplayPort adapter to ensure it has the current firmware version 2.0. The adapter should have a label on the cable calling out the firmware version number. You can update your firmware version by clicking here.
Q. My DisplayPort to DVI-D Dual Link Adapter is not detected by my computer when connected.
A. Many Accell DisplayPort adapters are AMD Eyefinity Multi-Display validated. They are able to meet all driver versions up to date. However, if for any reason the current driver version does not work with our adapter, we suggest to install driver version 11.6 or earlier. Please visit the link here to go to AMD support site for a list of all previous Catalyst display drivers for Windows. Please make sure you completely remove the current driver version (uninstall) before you install another driver version.
Q. When using an Accell DisplayPort adapter, my computer is unable to detect my third monitor or my third monitor doesn't display an image. What should I do?
A. There are several reasons why your monitor is not getting a signal. We recommend the following- Disconnect the first two monitors, leaving the third monitor connected to the Accell DisplayPort adapter. Re-starting your PC should enable the monitor to begin working. Once the monitor is working, re-connect the rest of the monitors. Go to "Display" properties in Windows and confirm all monitors are properly detected. Make sure all monitors are shown with the correct brand name and model number.
Q. When using DisplayPort to DVI Dual-Link adapter or mini DisplayPort to DVI Dual-Link adapter, why doesn't my monitor occasionally power up from "Sleep Mode"?
A. When a computer comes out from sleep mode, it takes 3-4 seconds to power the adapter. Some PC or notebook computer might react very quickly and cannot detect the adapter while it takes 3-4 seconds to power it up. Please try the below:
- Shut down and restart the PC, or simply unplug and re-insert the adapter's USB power cable to refresh power to the device.
- Power the adapter by connecting the adapters USB power cable to a 5V AC USB power adapter rather than using the PC's USB power.
Q. I am unable to reach the maximum supported resolution of 2560x1600, what should I do?
A. First, please ensure your monitor is capable of supporting 2560x1600 resolution. Also ensure that the cable connecting the adapter to the monitor is a DVI dual-link cable. To check this, refer to the figure below and look at the pin configuration at either end of the DVI cable. A DVI dual-link cable will have a group of 8x3 pins. The Accell DisplayPort adapters are plug and play devices and do not require driver download. We recommend to update your video card's driver to the latest version by visiting your video card's manufacturer website.
Q. Should I update my firmware even if my adapter is working fine?
A. The new firmware increases the threshold in the adapter allowing it to better respond to the signal strength from the graphic card. This is a performance enhancement that would benefit your adapter and we suggest that you update the adapters firmware.
Q. How do I obtain replacement for this product?
A. To obtain an RMA, please click here. Please refer to the Warranty Returns Procedure at the bottom of the page and follow the steps provided. Please download and fill out the RMA Request Form and email to email@example.com with a copy of your dated sales receipt.
For other inquires regarding this product, please email firstname.lastname@example.org
DisplayPort to DVI-D Dual-Link Adapter Product Information
|Product - Retail Blister Pack||Part Number||UPC Code|
|DisplayPort to DVI Dual-Link Adapter - 18inches/460mm||B087B-002B||826388105010|